Training Courses
Dogging Course (DG)
Dogging covers the application of slinging techniques including the selection and inspection of lifting gear, and also covers the directing of crane or hoist operators in the movement of loads, including when loads are out of sight of the Crane Driver.
Full Details
Dogging Course (DG) Refresher (Verification Of Competency)
A Verification of Competency (V.O.C.) is a method of assessment that can be used to demonstrate the worker’s ability to undertake the responsibilities of the Dogging job role, and upgrade knowledge to the current industry standard, including the application of slinging techniques, selection and inspection of lifting gear, and more.
Full Details
Rigging Licence Courses – Basic (RB)
Basic Rigging specifies the outcomes required to perform basic rigging work associated with movement of plant and equipment, steel erection, hoists (including mast climbing hoists), placement of pre-cast concrete, safety nets and static lines, perimeter safety screens and shutters; and cantilever crane loading platforms for licensing purposes. Applicants must be at least 18 years old.
Full Details
Rigging Licence Courses – Intermediate (RI)
Intermediate Rigging specifies the outcomes required to perform rigging work at the intermediate level, which includes all the outcomes for rigging work at the basic level, and may also include rigging of cranes, conveyors, rigging associated with tilt slabs, rigging associated with demolition work, and dual lifts for licensing purposes. Applicants must be at least 18 years old.
Full Details
Rigging Licence Course – Advanced (RA)
Advanced rigging is the use of mechanical loadshifting equipment and associated gear to move, place or secure a load including plant equipment or members of a building or structure and includes rigging of gin poles, flying foxes and cable ways, guyed derricks and structures, and suspended scaffolds and fabricated hung scaffolds. Applicants must be at least 18 years old.
Full Details
Rigging Refresher Course (Verification Of Competency)
A Verification of Competency (V.O.C.) is a method of assessment that can be used to demonstrate the worker’s ability to operate equipment and/or undertake the responsibilities of the Rigging job role, and upgrade knowledge to the current industry standard, including planning and the selection and inspection of equipment.
Full Details
Scaffolding Licence Course – Basic (SB)
Basic Scaffolding covers the scope of work to plan the job, select and inspect equipment, set up task, erect and dismantle modular scaffold and scaffold equipment. Participants must be over 18 years of age.
Full Details
Scaffolding Licence Course – Intermediate (SI)
Intermediate Scaffolding training covers the scope of work to plan the job, select and inspect equipment, set up task, erect scaffold and scaffold equipment and dismantle scaffold and scaffolding equipment. Participants must be over 18 years of age.
Full Details
Scaffolding Licence Course – Advanced (SA)
Advanced Scaffolding covers the scope of work required to erect, alter and dismantle scaffolding at the Advanced level. Scaffolding consists of all intermediate scaffolding work including all other scaffolding work connected with the use and operation of Hung scaffolds and Suspended scaffolds for licensing purposes. Participants must be over 18 years of age.
Full Details
Scaffolding Refresher Course (Verification Of Competency)
A Verification of Competency (V.O.C.) is a method of assessment that can be used to demonstrate the worker’s ability to operate equipment and/or undertake the responsibilities of the Scaffolding job role, and upgrade knowledge to the current industry standard, including job planning and the selection and inspection of equipment.
Full Details
Elevated Work Platform Licence Course (EWP Ticket)
This course covers the correct use and handling of Boom Type Elevating Work Platforms (EWP) Information about Scissor Lifts and other types of platforms is included. Also known as Boom Lift 11m. Participants must be over 18 years of age. Training is aligned to the national standards to ensure that the operator attains the skills required to operate in a High Risk Work environment.
Full Details
Elevated Work Platform Licence Refresher Course (Verification Of Competency)
A Verification of Competency (V.O.C.) is a method of assessment that can be used to demonstrate the worker’s ability to undertake the responsibilities of the Elevating Work Platform/Boom Lift role, and upgrade knowledge to the current industry standard, including pre-operation and safety checks, job planning, set up/operation/shut down of the EWP.
Full Details
Working At Heights Course
The nationally recognised Working at Heights course (also called Work Safely At Heights) has been created to prepare participants for all safety and practical aspects of working at height.
Full Details
Working At Heights Refresher Course
The Working at Heights Refresher course has been created to re-confirm a participant’s knowledge of all safety and practical aspects of Working at Height. This particular course is aimed at those who already have a Working at Heights qualification and need to refresh their theoretical knowledge. There is no practical training component required.
Full Details
Safe Working in Confined Space Course
The Safe Working in Confined Space course provides all information necessary to satisfy the training requirements listed under Australian Standard 2865, the Codes of Practice for Confined Spaces, and the various Regulations of the States. It also meets the Competency units laid down in national Training Packages.
Full Details
Safe Working in Confined Space Course Refresher
This online Confined Space Refresher Course will reconfirm your knowledge of all safety and practical aspects of Confined Space Entry. This course is 100% online and is based on national competency standards accredited by the State and National Training Authorities.
Full Details
UEE40411 Certificate IV in Electrical Instrumentation Course
This course is aimed at candidates who would like to gain exposure in / enhance their PLC, HMI and process instrumentation skills giving them the edge to enter the Oil & Gas Industry or any industry of preference – PLC interfaces with field instrumentation.
Full Details
UEE31211 Certificate III in Instrumentation and Control Course
The Certificate III course is aimed at those who would like to enhance their PLC, HMI and Process Instrumentation skills giving them the edge to enter the Oil & Gas Industry or any industry of preference – PLC interfaces with field instrumentation. The candidate will need to complete a log sheet documenting hours of work experience in the instrumentation field to attain this full qualification.
Full Details
UEE42611 Certificate IV in Hazardous Areas – Electrical Course
The Certificate IV course is for Electrical workers, Electricians who are seeking opportunity to work in oil and gas and chemical process industry (Hazardous Areas).
Full Details
EEHA Installation, Maintenance and Inspection Course
This 5-day course and is intended for Electrical workers and Electrical Engineers. This course covers the practical aspects of the course content with emphasis on inspection and testing.
Full Details
EEHA Refresher Training Course
The EEHA Refresher Course is run over two days and is a recommended refresher course aimed at keeping students current. It’s aimed at students who hold the competencies delivered in EEHA.
Full Details
EEHA Awareness Training Course
The EEHA Awareness training is a one day course. It is recommended for engineers and salesperson’s and the likes, who need knowledge on different explosion protection techniques of Ex-certified equipment. This will help candidates to select suitable equipment in different hazardous area zones.
Full Details
We are able to offer you the above course thanks to our mates at Your Licence and Tech Skills Australia.
Cribut has a partnership for nationally accredited training with Your Licence Pty Ltd and Tech Skills Australia. This provides us with a means to direct you to enrol in blue collar courses around Australia with teams that we trust.
We choose to partner with Your Licence and Tech Skills Australia as the Directors themselves have industry experience and are down to earth, good honest people. Your Licence and Tech Skills Australia have also kindly provided Cribhut Premium Members with a 10% discount on all courses when you enrol through a form via this page.